Handcrafted History

Historical and modern handcraft mixed with adventures


Leave a comment

Houppelande tutorial- part 2

Last tutorial was about how I made my first Houppelande (medieval over dress) that was an early houppelande, with a pattern layout that saved in on the fabric.

5931a86a0d18262c3a16897a364f6eaf

Now we move on to the opposite; a full circular houppelande dress that was the high fashion during the 15th century, and where worn by both men and women (with different lengths and fashion details of course) The construction method for this one is open for discussion; there might have been gores and more pieces according to different fabric widths during the medieval period. This layout is practical and simple if your fabric is 150 cm wide and you want the houppelande to be of as much fabric as possible, the small pieces allowing you to save in on the fabric a little.

The construction idea is from an article I found ages ago (that is now lost on the internet?) And later tailor’s books which shows very full dresses for women and coats for men. The shape, style and drape of this method also looks similar to paintings of houppelandes.

First of, you need a lot of fabric. How much depends on your length, in this example I make a pattern that gives you a dress around 150 cm long; good for the shorter woman or for a man (since houppes for men usually leaves at least the shoes visible) That means you will need 5,2 meters of fabric for the dress itself, and then another 1,5 to 3 meters for the sleeves. Oh, and maybe a full lining to?

20170912_134638

The pattern is basically 4 quarters of a circle; forming a full circle when put together. The small pieces saves you some fabric, but you may cut out the full quarter circles if you prefer. If you go with the pieces, then sew them together with the quarters the first thing when you have cut them out, so you have 4 whole quarters.

Then, sew the shoulder seams together, that is the short straight seams above the arrows. Leave the arm holes (on the pattern they are cut out as half moons) and sew the sides together. To know how wide your arm holes should be; measure yourself loosely around your armpit, or use a previous pattern. Add extra cm for movement; at least 5-6 cm.

The seam length of the shoulder should follow your shoulder; between 10-14 cm depending on how long shoulders you have. The arm holes should be laying on the body, not falling down from the shoulder to your upper arm. Cut away what you don’t need, a little at a time if you are unsure.

When you are satisfied with the shoulder, arm holes and side seams, sew the back and front together with each other, front to front, back to back. In the front you leave an opening big enough so you can dress and undress easily. On paintings some dresses are open almost to the hip. In the back you need to leave an opening big enough for your neck, try it on and you will understand! The open seam will give you the neckline on the back, and can then be cut for a rounder style if you like, or you could add a collar.

So, that was it- quick and easy yes? Now the dress should look something like the sketch above, and you can attach the sleeves to the dress. Sleeves? Well, that is for the next part of the Houppelande tutorial series. Stay tuned!

Spara


Leave a comment

Slashing and cutting fabric- a tutorial

During the 16th century it became high fashion to slash or cut fabrics in a decorative manner, and this was taken up by landsknechts and their women as well. Being a fashion for richer or high-born persons, it was quite the dare for mercenaries to wear, but such a good way to show that you were a high earner with lots of status and gold on your pocket…

IMG_1436

So, I wanted to share with you all my best tips for getting that slashed and cut look that you may want for your outfit!

IMG_1438

But first, some good things to know:

  • The most important thing is the material to work with; wool is by far the easiest. In finds and manuscripts you will also find garments made by linen, silk or a mix of these and wool, but those garments will have very small cuts (also called pinking) made with a knife, and is a whole different story. So; chose a wool fabric. A felted, dense and tightly weaved wool is the best, this will give you a sturdy garment that wont fray easily.
  • The slashing is not hemmed. I know many people do this because they chose a sensitive fabric, they are afraid it will fray and tear, or they have just been told that all raw edges should be hemmed or sewn. Right? While there are examples of special kinds of garments being hemmed at cuts, the standard is to not hem or sew the slashes. They should be raw, made with a very sharp tool, and yes- they will wear out faster than a garment that is not slashed.
  • Yes- slashed and cut garments may not last as long as more sensible ones, or look very pretty after using and washing, that is the point with this fashion! You’ll have to be rich enough to order fine materials, pay a tailor to sew it for you, pay even more for the slashing and cutting, and then don’t mind that you will have to exchange the garment once it looks worn. If you are a more economically laid modern person, pick a wool fabric for your outfit, since this lasts longer than silk or linen.
  • Almost all slashed garments that I have seen have been lined with a second layer of unslashed fabric. This could be a regular lining, or a whole garment that holds together the one laying over, providing stability and fitting. I often use a linen fabric for wool and silk fabrics, but in the case with slashed guards (strips of fabrics) I place the guards on top of the main fabric, to make it visible through the slashing.

Feeling ready for some slashing now?

IMG_1538

The pictures are mainly from my trossfrau dress project, this from a woodcut that I have copied and coloured to get a feeling for the dress to be.

I usually wash my wool fabrics, iron them and then cut out the pieces I want for the garment. Before I sew them together I draw out my slashes on the wrong side with a fabric marker, and then cut them before I put the garment together. If you are not sure about the fitting, it is good to baste the garment together and try it on before this, since it is difficult to adjust fitting after the slashing is made.

20150505_193058

I usually also draw out helplines during this stage; everything that helps you make good sharp lines placed exactly were you want them is good. A ruler, some mathematics and a marker goes a long way. I also like to make a template to use while drawing out the slashes.

IMG_1433

Do not slash all the way to the edges, remember the seam allowance and leave 2-3 cm along the edges to make it easier to sew the pieces together.

IMG_1990 (2)

This is a larping outfit (only inspired by historical fashion) as an example of a durable slashed garment. The arms have slashes, but not the armpits or body, and the slashes ends some cm before the seams. Sewn in melton wool from Medeltidsmode.

If you want the garment to be sturdy and hold together, slash less along the armpits, side seams and crotch; all areas were the fabric gets more wear. If you look at historical woodcuts and painting, you may notice that tight fitted pants has no slashes at the backside of the legs near the seams, neither over the butt (there might be exceptions, as always)

11879095_10153482270739892_682932696704880751_o

The finished dress, a hot day in Visby a couple of years ago

 


2 Comments

The Herjolfnes dress

Last year I made a woolen dress, based on the cut, sewing technics and seams from the finds from Herjolfnes, Greenland. I really didn’t plan it, I just had this sudden burst of creativity and had to make a plain, undyed working dress… The fabric is from Medeltidsmode, and it is an undyed natural wool that was just lovely to work with, the seams went very well, and the drape of the shirt is really good to. It is based on two different models, but with my measures- so it is a historical reconstruction with a practical use in mind.

Cutting out the pieces

And sewing them together with running stitches in wool thread

Sewing gores from the right side of the dress, with a whip stitch

The hems are made by a single fold, whip stitched and then sewed with another seam according to the finds. To finish of the hems two times was a bit tiring, but the result went very well, with especially the neckline and wrist coming out nice and stable for wear.

All inside seams are felled and whip stitched down, to make them more durable and the inside smooth and pretty.

There are several gores in the dress, both in the shirt and in the sides, that goes up to the arm holes. This gives the dress lots of hem line, as well as a nice drape. If you would like to make a dress more modern flattering, you could begin the width in the side seams by the waist. My dress is lose almost under the bust, which makes for a warm dress, that is easy to get in and out of, and probably good for medieval pregnancy if you are interested in trying that out…

The dress is so comfy, and despite a rather smooth fit over arms and shoulders it is easy to move in it.

On these photos I have rolled up my sleeves a bit and you can see the linen shift, a good way of keeping your sleeves dry when doing dishes.

Definitly one of my favourite dresses right now, it being so simple and yet pretty!