HANDCRAFTED HISTORY


Leave a comment

18th century jackets

This is incredibly modern to be me, I know! My latest infatuation has totally been the 18th century pattern drafting, mainly jackets, gowns and a whole bunch of skirts. And hats. Who doesn’t love hats?

Jacket in green wool twill and skirt in deep blue wool twill

Anyway, after my first attempt making a 18th century ballgown, I wanted to dive deaper and learn more about 18th-century pattern making and clothing styles, so I have spent the last couple of years on learning a bit about different 1700styles on my free time.

First out after the corset, shift and petticoats came these two jackets, based on an original piece and a drafted pattern from Costume Close-up (which is an incredible interesting and fun book that I recommend). I altered the pattern a bit, both to fit my measures but also to another style that fitted the extant pieces and fashion plates I was inspired from. Then I made a jacket in printed cotton, lined with linen and with linen ruffles on the sleeves. It came out really well both in pattern drafting and seams, and I was happy…

Reproduction cotton printed fabric with flowers

So I just had to try to make it in wool to experience the difference in fabrics. I choose a scrap from an old project; a thin wool twill that I lined with striped linen from another project. I love small but complex projects that means lots of sewing on a small fabric budget!

Green wool jacket, front.

Since I found the pattern with the stomacher pinned onto the jacket difficult to put on fast, I tried another style for the wool jacket with the stomacher fastened behind the ribbons in the front. To make it even easier, I basted the stomacher to the jacket on one side, and added two hooks and eyes to the other side to be able to fasten it before pinning and tieing the ribbons. The hooks are not a historically based solution as far as I have seen but a very convenient and fast one.

Front lacing before stomacher.

The cotton flower jacket was laced in the front before pinning the stomacher over, covering the lacing and the corset. It is perfect for adjusting the size and the lacing strips with the eyelets where fun to made.

Pinning the front in place.
Fashionable autumn outfit to keep warm

I made a whole outfit to go with the jackets (except shoes, I need to get me good shoes)

  • linen shift
  • corset
  • under skirt
  • wool skirt
  • fishu
  • bergere hat in wheat straw
  • linen cap with a lace edge
  • cape/cloak in red fulled wool
  • white fine knitted socks

The linen shift and corset are the same that I made for my ballgowns, but since they are not showing I intend to go with them until I do more serious 18th century adventuring than a photoshoot or a picnic.

The underskirt is a simple cotton skirt, and the overskirt in wool is slightly longer and wider to make the silhuette nicer and make sure the undergarments are not showing. I had to piece the skirt together from several scraps of fabric, which of course is historical even if it doesn’t show in photos. I am planning to make an apron to go with the outfit in the future.

The fishu was great for consealing a modern tattoo

The fishu (scarf) is a trangle of thin silk which you tuck into your jacket to look modest and warm (and fashionable too!) The hat I made with wheat straw and silk fabric cut and sewn (and maybe a bit of glue too) to the hat in a fashionable pattern, and then I added broad pieces of silk fabric to tie it in the back.

The linen cap pattern comes from the American Duchess book, but I adjusted it a bit to fit well. The cloak pattern comes from a pattern diagram from Costume Close-up but I had to adjust that too, to be able to use it with the piece of wool fabric I had left. I also added slits for the arms and a small, almost invisible closure with hooks and eyes at the front in order to be able to wear it closed while doing things outside.

The garments are handsewn with the exception of some longer inside seams machinesewn to save time, and I used linen thread and silk threads for everything.

Dressed and ready for autumn!

The redrafted pattern for the jackets in size Eu 36-38 is available, send me an email if you are interested!


Leave a comment

How to make a Herjolfnes pattern

herjolfnesintro

I promised you some insights into the Herjolfnes dresses with the many side gores, and here’s my take to understand the patterns!

(This guide is a “make it work for you” guide, if you want to make a dress as similar to the extant finds as possible, you might want to use the published materials mentioned below instead)

IMG_0283

First, if you have “Medieval Garments Reconstructed”, it might be fun to try these patterns out. But remember that these are just general patterns, and they are not made for your body, nor your measurements. The risk is therefore that they will not fit very well, and you will be kept wondering what to do with this new and mysterious pattern.

WP_20160701_09_01_30_Pro

Furthermore, the original clothing (and patterns) were made to a very different person, with a different lifestyle than yours, a body marked by another way of living, and the clothes were being worn and as the last thing, used instead of coffins for the dead last rest. Translating these clothing into patterns is important to understand the general pattern construction, but after this, I believe it to be more useful that the dress you finally make is going to fit you well.

To achieve this, I recommend you start with a personal pattern; a mock-up or toile. Once you have this one, you can then transform it into a pattern with as few or many side gores as you wish. To demonstrate this I made a model in paper for you. You can try out this method in regular paper first if you want, or go straight for patterning paper and 1:1 modelling.

Step 1: The shadowed picture is my toile/mock-up for my upper body. I have made a start pattern with the skirt attached to these (by the waistline) and two integrated gores; middle front and middle back. On my standard dress pattern my back piece is whole (no seam along the spine).

handcraftedhistoryherjolfnes3

Step 2: I cut the front and back out, along with a side gore. This is the pattern for my red cotehardie.

handcraftedhistoryherjolfnes4

Step 3: Time to go sideways! I mean side gores… I mean, just cut the pattern pieces apart like I did here. I place the cut where the armholes start to bend, or around 10 cm in from the sides. The bigger size you have, the bigger piece you will get.

handcraftedhistoryherjolfnes5

Step 4: Cut the side gore in half, and tape each half to the new side pieces.

handcraftedhistoryherjolfnes6

Step 5: To make it easier, I draw the new side pieces on a piece of paper, and add some width to the other “side” of the side gore; where it is straight. I don’t need a lot, between 30-40 cm on a full pattern.

handcraftedhistoryherjolfnes7

Step 6: The front and back pieces also get added width at the bottom hem. It’s illustrated by the orange part in the picture. The width gets added to both front parts and back parts. This will give you pieces that have no straight vertical lines on the skirt but flared lines resulting in a lot of circumference around the hem (fancy!)

handcraftedhistoryherjolfnes8

Step 7: Now I have a pattern with added side gores, 2 on each side. The gores at the front and back pieces have been added as a part of the pattern to simplify, but you could also piece everything together.

CF= centre front (where my lacing is on the green dress) and CB on this pattern means you will have a seam along the back since the gore is integrated. You could also keep the back piece whole, and insert a gore in the middle. I will show you how I do this in another post. (Also note that I show you a half dress in these photos; when you do your dress there will, of course, be another half of the dress too.)

handcraftedhistoryherjolfnes9

Step 8: Want more side gores? Not a problem! Repeat the cutting-party, and cut each of the side gores in two. Here I have done it on the front side gore. I recommend marking your pieces with front, back, and arrows to show where they belong, and I also keep my waistline (dotted line). It can get confusing otherwise…

After this, you can add more width at the hemline to each of the new gores, drawing out more width from the straight side like shown above. You can also add A Lot More Width as shown below if you want to have a fancy dress with a great amount of fabric.

handcraftedhistoryherjolfnes10

Step 9: Very important. After you have cut all your pieces and redrawn them, it is time to add the seam allowance. Add 1,5-2 cm of seam allowance around all pieces, either on paper or directly on the fabric. If your starting mock-up had seam allowance integrated, do not add more to those lines that you have not touched this time.

Step 10: Whoho, a new Herjolfnes based pattern has emerged! Cut it out in mock-up cotton fabric to try out the fit, or just do like I did and cut out all the pieces in wool, with a bit of extra seam allowance. Extra? Just to be able to baste the dress together and try out the fit + if you are satisfied with all the new side seams. I did not need the extra seam allowance, but I intend to use the photos to make even another tutorial on the subject of fitting a dress pattern.

Remember that the side seams are not “princess seams” which are put over the bust to give it a modern form. The Herjolfnes seams are more on the side of the bust and give you movement, a good drape and lots of hem.

I made the sleeves based on a regular S-sleeve pattern I already had, and for this construction method you should not need to adjust the sleeves much (if you have a working pattern), just check so the armhole doesn’t get too wide; measure your seam allowance when making the dress, and then insert the sleeves after sewing all the side gores and front + back panel together.

handcraftedherjolfnesside

The finished dress in medium thick twill wool fabric. The dress is actually quite loose, and I cut the sleeves short, and the hem above the ground, to make it into a good working kirtle for historical markets.

The original Herjolfnes patterns don’t have lacing, but I decided to add that and take in the dress a bit to get a fit I am comfortable with. I also hate pulling a tight dress over my head as I always mess up my hairdo and cap, so the laced ones are my favourites. Once again, if you aim for a recreated pattern rather than an inspired one, you might leave the dress a bit looser and skip the lacing.

Useful notes:

Remember to add seam allowance to your new pieces, I like to add a bit extra (2-3 cm) in order to easier make adjustments during the fitting.

When you have achieved your new pattern in mock-up fabric (or cut it out in your wool fabric) baste all the side pieces together to try out the fit. The many side gores will adjust the weight and fall of the fabric and there might be more stretching that needs to be addressed.

You also have a lot of seams now where you can make adjustments to make the dress fit perfectly to your body. If you need to take it in; don’t take in all the extra width in just one seam, but spread it out between the seams.

Also; remember to wear your medieval supportive garment or modern bra of choice when fitting the dress so the dress will fit the bust nicely.

Sources:

Woven into the earth, Else Ostergaard, 2004

Medieval garments reconstructed, Ostergaard mm, 2011