HANDCRAFTED HISTORY

Tag Archives: 16th c


by 2 Comments

Medieval jacket for a woman

15th c outfit at Oslo Middelalderfestival

This is a fun garment since it is both practical and in my opinion, also cute. But it took me several years of studying medieval manuscripts and art before I got interested in this type of garment. It seems so modern? But once I noticed it, I found more examples in different places and even a contemporary pattern diagram in Drei Schnittbucher dated from the 16th century. Most sources I have saved originate in central Europe, mainly today’s Germany.

Research

The jacket or short coat can be seen in both late 15thc entury and 16th century artworks, but all examples I have seen are worn by working women, from farmers to ladies’ servants. One source in Drei Schnittbucher mentions a short jacket owned by a burgher class member, which indicates that it might have been a fashionable item and not only something worn for “survival”.

Peasant Woman with Two Jugs, Beham 1524 CC

The jacket above is similar to the pattern diagram I found, though it has cuffs. The front closure is hidden but might be hooks and eyes, and the sleeves are S-sleeves put into a shaped armhole. The skirt part hangs in soft folds, probably a circle shape.

source: Württembergische Landesbibliothek

In the left corner, the lady wears a green jacket over a dress. She might be a maid or retainer of some kind, based on her dress and position in the picture. The jacket is fitted with a narrow sleeve and a fashionable neckline. The skirt part hangs in soft folds.

source: Badische Landesbibliothek

The blue jacket is fitted but the sleeve is a bit looser than the green one, and the neckline higher and rounded. I decided to base my jacket silhouette mainly on this picture (late 15th century).

source: Stadbibliothek Nurnberg, Jorg Urlaub, 1568 (PB)

Based on contemporary sources the jacket seems to be a practical garment to keep you warm while still allowing you to go on your daily chores (and keeping that fashionable silhouette!) I have found several sources from the middle of the 16th century onwards, often with the skirt part shortened like the jacket above. The black jacket has a short skirt, straight narrow sleeves and a collar of some kind. The collars seem to belong to the 16th century.

Differences between the 15th century and the 16th century styles:

Late 15th century jackets seen in art are all colourful, with straight sleeves narrow or loose, longer skirts (the lenght of the skirt and the length of the upper body seem to be similar) and with simple, rounded necklines.

16th century jackets transform from this softer style to a more shaped and fitted garment with details to accentuate the tailoring such as collars or sleeves starting farther down the shoulder.

Source: Badische Landesbibliothek

This time I decided to make a jacket to be worn with my 15th century wardrobe. Some years ago, I tried out this pattern by making a black jacket to be worn with my 16th century working woman’s outfit, but I sold it and wanted to try some variations. The blue jacket above became my inspiration, and I used the pattern diagram from the 16th century source to draft the jacket. The side seam is adjusted towards the back on that pattern, but in retrospective I think that is a bit too modern for the late 15th century style, but I got curious to try it out.

Back with the side seams visible.

Drafting the pattern pieces

I decided on a straight S-sleeve to get good movement even when wearing dresses under the jacket, a longer skirt and a rounded neckline. The front closes with hooks and eyes. The original tailoring book states the lining needed for the jacket which is roughly half of the amount needed for the jacket. The fabric widths could be different since the pattern mention different amount of lining for different skirt lengths, or the skirt was not lined. I decided to put lining into the skirt too, to see how it would turn out as well as to make it more wind resistant.

The best way to create a skirt with even, soft folds, like the longer versions seen in the sources, is to use a circular cut on the skirt, rather than straight panels and gores. The contemporary pattern also suggests this style, so I went with that option.

The length of the skirt in 15th century sources seems to be around the same lenght as the torso, around 40-50 cm long perhaps. I decided to go with that. The tailoring pattern suggests a skirt lenght between 39 cm to 52 cm, which can be seen in the woodcut by Beham above.

To draft the correct size for the skirt pieces, measure around your waist and use that measure to calculate the inner circle diameter of the half moon, and draft the piece from there.

Example: Measurement around waist: 80 cm = circumference of the inner circle. That makes the diameter approx 26 cm, and the radius 13 cm. The length of the skirt = 40 cm. Mark 40 cm + 26 cm + 40 cm on a straight line = diameter on the skirt pattern piece (the straight side of the half moon). To draft the rest of the skirt, start with drafting the half-circle waist hole (measure from the middle of the line and draw a half-circle 13 cm from this point all around). Use this line to draw out the bigger half moon shape, by measuring 40 cm outwards all around the curve. Make 2 pieces for the skirt.

The upper body pieces are based on my toile/mock-up I already have (check out my Patreon for a video on how to make a mock-up yourself). To move the side seams I cut off a bit from the back piece and taped this side to side with the front piece instead. After that, I added seam allowance and some extra movement in the sides, shoulder and front to make the garment suited to wear over other clothing.

The sleeves are based on my existing S-sleeve pattern, cut in two. I added new seam allowance and made the sleeves a bit wider than my dress sleeves to get more movement.

Adjustments from the original pattern from the Leonfeldner tailor book (grey) to my jacket (dotted lines).

Differences between the pattern from Drei Schnittbucher and mine: The waist seam got rounded to create a soft fall and looser fit, and the shoulder seams were shortened to make the sleeve fit the anatomical arm, creating a softer look more suitable to the late 15th century style. I removed the collar piece on the back and decided to make the back piece as one, instead of having a seam in the middle back. Both options are represented in tailoring from late 15th century art sources, I just didn’t need the back seam to achieve a good fit. The last alteration I did was to piece the skirt parts to save on fabric. In the tailoring book, the sleeves are made in two pieces, probably to save on fabric, and I wanted to do the same to be able to cut them out from the scraps left over after cutting body and skirt pieces.

My jacket needed around 1,5 meters of fabric with 1,5 meters width for both outer fabric and lining, but I would recommend at least 2 meters of both if you have, if you are not smaller than I am!

Fabric: I decided on a medium thick wool twill for the jacket to keep me warm, with a soft muted madder tone. The lining is made in thin unbleached linen. I aimed to make the jacket a working garment and not too fancy, but neither coarse nor homemade.

Jacket worn open

Sewing order

When I have made all pieces (back, front *2, sleeves *2, skirt *2) I like to cut these out in a mock-up fabric (like an old sheet) bast them together and try the garment on over the dress, to ensure I have enough space for movement. Adjust if needed, and then I use the mock-up as my pattern and draft the pieces on the wool fabric and lining.

I like basting- here are some more benefits:

  • no pins will disappear or hurt you
  • no slippery fabric moving, giving you uneven seams
  • easy to try it on several times
  • easy to adjust
  • basting is so secure you can sit on the sofa with your project in your knee, without messing up the fit.

I prefer to sew one seam completely finished before the next, which is faster and more ergonomic than first assembling the garment, and then reaching all the seams for felling the seam allowances.

Sewing thread: unbleached linen 35/2 for most seams, paired with a sewing wool yarn for felling seams and create softer seam allowances. These are the materials I work with fastest. You can also use linen thread for the whole jacket, which would be a bit more historical as far as I have researched.

For me, the most important thing when hand-sewing is to make easy, fast seams without adding unnecessary strain to my fingers. The lining is put in at the same time as I sew the pieces together, in seams that need more sturdiness like shoulders and sides. In the skirt, the lining is fastened in the seam allowance when felling this down. The sleeves are made as 4 separate sleeves, and then the lining is put in. This minimizes the bulkiness in the sleeve seams.

Notes: linen thread if nothing else is stated. Sa= seam allowance.

This is my sewing order for hand-sewing the entire garment:

Start by joining the sleeve linings into whole sleeves with running stitches. Press the sa and whipstitch down to one side or leave them unfinished. Join the wool sleeves with back stitches. Fold down the sa, whipstitch down to one side and repeat with the back seam to get 2 complete wool sleeves.

Sewing the sleeve parts together.
Whipstitch the sa (photo shows the inside and outside of the sleeves.)

Sew the shoulder seams with backstitches, wool + lining at the same time. Press down sa to either side, whipstitch down. I leave the basting in while sewing, and place my seam 1 mm to the side to avoid sewing into the basting thread. This makes it easier to remove the basting thread once I am done.

Backstitching on shoulders 1mm inside the basting seam.

Backstitch the side seams together in the same way. I like to leave these open to adjust the fit if my weight changes, so I just whipstitch the sa but leave it loose from the main body. Then I put the sleeves in the armholes and sew them with backstitching. Cut down the sa and fell it towards the body with whipstitching.

Assembling the garment, with different ways to finish the seams shown.

I sewed the wool skirt parts together with back stitching and pressed the sa to either side. After that, I put the lining into the skirt pieces by folding the sa down to either side and whipstitched the lining in place.

Attach the skirt to the body with backstitches. Try on the jacket and mark out the hemlines; check the length of sleeves and skirt hem.

The skirt is finished by cutting down the lining a bit to avoid a bulky seam, and then the wool hem is double folded over the lining and whipstitched in place.

Trimming down the lining.

The front got a reinforcement strip in wool on the inside before the closure was added. I use running stitches and sew it front to front, then fold it over, press it to a good shape and whip stitch the loose part to the lining. A row of stitching along the edge makes it neat and durable (shown in the assembly photo).

The sleeve wool fabric is folded over the lining by the wrists and whip stitched in place. The neckline is also folded down twice and whipstitched. After that, I like to press it and then add a row of stitching around the opening to make it even neater!

Last, I added hooks and eyes to the front to be able to close the jacket.

This was a really fun project to do, and I have used the jacket a lot this season. It is easy to work in and doesn’t get as heavy as my coat does. Useful for medieval adventures!

Finished!

The 16th century Working Woman

by Leave a comment

At DW University on a weekend event

Back in 201something (2016 maybe?) I made this outfit with a brown woolen overdress, based on Drei Schnittbücher by Katherine Barich/Marion McNealy. I wrote a research post to summarize my background research and thoughts but never got around to writing about the finished outfit. The research focused on middle Europe in the early 16th century, but when I found the book with pattern drafts I took the sidestep to try and make the gown after one of the models presented, even though it might be more probable to have made a dress with a waist seam like my trossfrau dress. But who can resist a fun pattern draft from a medieval tailoring book?

Since then, I have been wearing this outfit several times and even adjusted the dress with a lower neckline and a piece of mending over one of the skirt folds. I like this outfit since it is both pretty and comfortable for working, so I thought I would share it with you.

Winter event, with all three layers

I start with a basic linen shift in half bleached linen, based on my tutorial. It has a square cut neckline to match the dress and kirtle, and long sleeves.

Over that, I wear a kirtle or middle dress in wool, sleeveless and simple. This is a really practical working garment, and allow me to roll up the shift sleeves when doing dishes. Back then, I had a yellow sleeveless dress, that got sold to make a new one, one size larger.

Unfortunately, I got sidetracked when making that and decided on an Italian styled dress that is also shown in this tutorial. After that, I realised I really needed a middle layer to make this outfit complete, and made another kirtle in grey-blue wool, with a decorative fabric strip in black wool.

Both the middle layer and the overdress is rather tight fitted, giving me bust support when worn.

(This is what it looked like at first before I moved the neckline down a bit)

The overdress is made in brown wool with decorative borders in amber coloured wool. I liked this dress pattern since it is quite different from others I had tried, and I fell for the challenge. Sadly, the tailor books do not come with much information about how one should assemble all the pieces, so you could best describe this as a try on a medieval pattern, rather than something strictly copied.

I adjusted the cutting out of the fabric pieces to fit the fabric I had available, which was around 300*150 cm of wool. I also choosed to widen the skirt at the back to make it look more like the artwork from the period. The tailoring book shows the centre back (and front) straight, but that does not give the desired folds seen on women. Maybe a gore was supposed to go in there, or some other adjustment that was so obvious none bothered to write it down? To accommodate for the skirt width, I had to piece the sleeves with three different fabric scraps to get the dress together.

The front piece is folded at the centre front, making the skirt without a seam in the front.
The back pieces are pieced at the hem for fuller width
One of the sleeves, basted for trying on.
pattern pieces from the book

The overdress (well, the entire outfit) is sewn by hand, and on this dress, I only used linen thread, a choice I based on research for the period. Sadly, I have misplaced many notes and sources so the only reference I have left is a note saying “linen thread common for working-class clothing, do not bother with silk or wool). Ok, I apparently did that…

The skirt panels and some longer seams are made with running stitches, and the rest of the dress is sewn with backstitching, and the seam allowances are sewn down with whipstitching. The decorative fabric pieces are also whip stitched in place. On the inside, the dress is lined with a piece of sturdy linen fabric in the body, and the front closing is reinforced with a piece of linen canvas and closed with hooks and eyes. Another possibility would be lacing, but I like how fast the dressing is with hooks and eyes!

I found this model harder to fit than the 16th c models with waist seam, since you can’t adjust the waist placement during fitting. It has to be cut out at the beginning. I like to raise the waistline 1-2 cm above my natural waist to achieve the early 16th c silhouette, and that was more difficult here. But the dress made up for it by being really fun to assemble with the skirt folds.

I folded the skirt part that stretches outside the body in several folds and fastened these to the sides and centre back of the body. This gave a lot of strain on specific parts of the dress, causing the folds to rip when someone accidentally stepped on the dress hem. So I mended that side with a piece of fabric.

Here you can see the folds in the centre back and sides.

If I were to remake this whole pattern, I would choose to cut a slit between the body and skirts and fit the skirt in folds as you do on 18th c clothing. But this was several years ago and I hadn’t tried that technique yet.

Side view showing the gathered skirt fabric in the side; drapey and voluminous!

The greatest thing about this pattern was the drape of the skirt. It is full and generous and the folds look great in the centre back and sides. The front on the other hand is straight, with just an extra 15 cm overlap to allow for getting out of the dress. I just fold the gap shut and wear an apron above, but you could pin or hook it in place, or make a slit in the front. The straightness of the front makes the skirt great to work in; when I bend forward the skirt rearrange itself towards my legs, avoiding any flames or obstacles before me. Someone gave this thought “back then”!

The gollar I already made a tutorial for, and you can find it here. The early photos show an amber coloured English broadcloth gollar, fully lined with fur. The red one only has fur strips, enough to add some warmth but still be conveniently small for packing in a suitcase… Erh, I mean historically stylish yet cheap. Yeah?

The cap is a simplified Birgitta cap, and should be worn with a veil on top to be considered “well dressed for the public”. These caps are unusual in contemporary finds from the 16th century, I have seen a model doll and some “maybe” examples in art- it could be a cap but could also be a folded veil or other headwear. Hairnets, veils, braids, straw hats and other kinds of headwear are also visible. The most important is to have your head “dressed”; either with a hairstyle or headwear appropriate to the period.

You can find my pattern on the Birgitta cap at my Patreon or in my Etsystore.

The hoses are the same knee-high wool hose I use for other outfits, and here is a tutorial to make your own.

The apron is made in handwoven linen and smocked with linen thread. Two double folded strips of fabric were sewn shut to form the bands that I tie the apron with. The rest of the apron is only double hemmed and sewn with whipstitching.

When I went back to my old research post I also remembered that I wrote that I needed a jacket and a cloak, amongst other things. I actually made several examples of wool jackets, but they never made it to the blog for some reason. A black wool jacket based on the same tailoring manuscript book as the dress got photographed at an event, but then I sold it to make another one and try out some variations.

photo: Annika Madejska

Phew! So this was a lot of thoughts, and sewing, and years gone by without finishing up the writing on this project. I seldom return to old projects like this one, but since I still like it I thought it would be fun to share it with you. It is not a tutorial of any kind, more of a diary or a presentation of a project done.

Sometimes when you see others on the internet doing cool projects and posting photos of fancy dresses it is easy to feel like you don’t get anything done, but sometimes the road to finished projects can be long, windling and a bit unsure. It is ok too!

My Patreons wished for more research to be published, and I am happy to do so! Want to support the blog and be able to ask for content? Consider joining my supporters here!


by 4 Comments

My 10 best dresses

Hi! So nice of you to drop by to read! This time, I wanted to take you with me on a small tour of my virtual wardrobe, showing you some of my favourite dresses I have made so far. Be prepared to see some really old stuff now, because it wouldn’t be very fun if I just posted photos of the 10 most recent, high-quality dresses I made right?

(Yeah, you wouldn’t think it was as nice sneaking a peek into my actual wardrobe, it’s quite full and maybe not in the best order. Have you seen my sewing box? Then you’ll have a feeling for what my wardrobe looks like…)

Let’s start at the beginning; my first buttoned cotehardie. This one is an old dress (the photo is from an event in 2010) long gone to someone else. It was my first try doing a 14th century dress with a closer fit. I can’t say I really knew how to make medieval fitted garments but somehow I managed this one and I was sooo happy with it. I remember looking up to others at the event, pondering how to make such awesome garbs like they wore, and how to manage a really good sleeve.

35097_137889232900159_444021_n

This early in my erhm, blogging career (can you call it a career if you are not making any money..?) I didn’t get many photos of my own outfits but rather took photos of everything I saw, trying to capture those magical moments and the cool things others wore. Like these outfits- I still remember thinking I would totally want to be that skilled when I grew up!

Oh, I had completely forgotten about this one; the green herringbone twill wool was a really expensive (in 2011) fabric of awesome quality, and I made some kind of Herjolfnes dress with lots of gores in the side and skirt. It was so comfy, fitted me well and I used it quite a lot before selling it. Actually still missing it. Here I am wearing it as a middle dress under my viking apron dress. Couldn’t find any good photo of just the dress.

IMG_8812

Oh, my green Moybog gown! Somewhere around 2010-2011, my real interest in medieval pattern construction techniques began and I wanted to try the Moybog sleeves. I remember that I first made a short-sleeved one, wore that for a while and then remade it with long sleeves and better fitted gores in the skirt. Another dress I was really satisfied with at the time I finished it and wore a lot over several years. Then I wanted to make new experiments and sold it to be able to afford new fabrics.

IMG_9253

The 16th century trossfrau dress is one of my oldest that I still use (I tend to get tired of old projects and sell them off…) But I still like it. I put a lot of effort into research and actually making it historically accurate and fun at the same time and finished it in early 2015. It is hand-sewn, the pattern and construction methods still hold up to my standard, and the colour is just sooo… fugly. The purple hue is actually based on a natural dye, so the thing that is least accurate with the whole outfit is the slashing on the hat; I was too fast and made it pretty rather than historical believable.

My wedding dress from 2017. This has a special place in my heart, I don’t know if it is the dress itself (it is rather plain) or the event it got used at… It’s a 15th century silk dress with open sleeves below the elbow, lined with really thin wool muslin, and decorated with silk cords and small freshwater pearls. I would like to redo it a bit as it doesn’t fit right now, and therefore I don’t use it. But I do feel a bit unsettled every time I take it out from the wardrobe and think about cutting it apart to redo it. Maybe I am lazy, or a bit nostalgic. Yeah, I will probably remake it any minute (year)…

A1 (2)

I loved this one! It is a 15th century houppelande (overdress) in black velvet with moss green edges. The sleeves got lined with my last pieces of green silk that I owned, and they made for a very good contrast to the rest of the dress I thought. The dress was only worn once during this photoshoot in 2017, and then I sold it to a happy customer abroad. I loved it, but I didn’t need it. I mostly made it to practice sewing in velvet and to try out the pattern, as it was my first try to make a full circular houppelande.

IMG_1622 (2)

My red 14th century wool cotehardie, completely handsewn, and with 20 pewter buttons in each sleeve. What is not to love? It is red, fancy, a really serious try on reenactment clothing and I feel Amazing every time I get dressed in it. Sometime around here I also started to feel like hand-sewing a whole garment wasn’t such a big deal. Nowadays I hand sew most of my wardrobe, with exceptions for some of my undergarments, and projects that have a short time frame.

redcote

Ok, I know, it’s a whole outfit rather than just a dress (I can cheat right?) but I couldn’t leave this one out. The amber dress project was just that; a very serious and creative project which was so much fun to make. The process actually took several years, but somehow this outfit came to be a milestone where I felt that I had learned new things and evolved as a handcrafter.

amber4 (2)

Yes, I have a thing for green. But you knew this one would show up here right? It is green, comfy, dramatic and 15th century. What is not to love? This was actually my latest houppelande after making several tryouts to explore drape, patterns, construction methods and different fabrics (you can see them below) and it is handsewn in a high-quality woollen cloth, lined with silk fabric. In this photo, I wear it full “Weyden style” to portrait a well of woman from the middle 15th century, dressed in rich fabrics to the height of fashion of the time.

IMG_2296

Mmm, this is not a clear participant in this post just by the look of it. It is a really simple dress with panels and gores, handsewn in undyed ecological wool (in 2018 like so many of my other dresses). But it is one of those dresses that makes you feel awesome, comfortable and just warm enough whenever you wear it. It’s magical. If I was going to wear medieval/viking clothing every day I would probably wear this one 9 out of 10 days.

IMG_3175 (2)

So, there you have it! Some of my projects over the years. It was a bit challenging to pick out favourites, and I know I left my new 15th century wardrobe out (but hey, you’ve seen that one a lot lately) as well as my viking apron dresses I’ve made that I really liked. Sometimes I’ll have to put together another Viking-wardrobe post maybe.

What do you think? You have any favourites that you would like to make a version of, or do you already have “the best dress ever” in your wardrobe? I would love to see it!