Lacing is a really easy solution when you would like to make a tightly fitted garment and need an opening to be able to get in and out easily. During the medieval period, lacing comes and goes as a popular fashion and practical solution choice, so if you aim for a historically believable garment make some research first to determine if the lacing is the best option!
Historical garments may also be closed with fabric or metal buttons, hooks and eyes, pins or a regular whip stitch.
Lacing can be seen on male and female clothing, but today I wanted to show you how I make lacing on a dress. The most common lacing method is spiral lacing; one cord for closing the open space by going through lacing holes spaced a little uneven from each other. This is easy and quick, and you only need one cord.
To unlace; thread the point back again, or as below: use a loose knot at the start of the lacing (at the bottom) and unravel the lacing from the bottom up.
I place the lacing holes like this; the first two and the last two are aligned but the rest is spiralled. This gives you a tighter lacing, that looks better and is historical. By making the first and last pair even you will get the front panels even to each other. This kind of lacing can be seen in paintings by Weyden for example.
Lacing holes needs to be quite close to each other; between 1,5 to 2,5 on one side, depending on the fabric and the amount of support you need. A tighter gown supporting a heavy bust needs a closer lacing, while a looser garment might have more space between the holes.
To make lacing holes I use a sharp awl to make a small hole, and then a fitting thicker awl in metal, wood or bone to make the hole bigger. I do have real awls, but since they seem to always be “somewhere else” a bunch of different objects has been used; needle binding needles, hairpins, chopsticks… You don’t need anything fancy, was my conclusion. Yeah…
After the hole is made the right size, I sew around it with a buttonhole silk thread or a waxed linen thread (depending on social status, period, colour etc) I never bother with any fancy stitch, just sew around like this, and cover the hole equally with thread. Practise makes perfect; don’t bother if your first holes are a bit uneven, if you start from the bottom and work your way up they will look really nice by the time you reach the area others actually look at.
A tip for making the hole more even is to first sew one round of stitching around the hole, and then another turn, dense enough to cover any gaps.
On the inside of the lacing, you can see a thin strip of tabby woven, sturdy linen fabric. I always use a piece of fabric on the inside (if I don’t have a whole lining in place) to strengthen the edge and make the lacing look better. You can use linen fabric scraps: cut it in a straight piece, fold in the raw edges and sew in place with whip stitches or slip stitches.
I prefer to make the cord in either wool or silk thread. The wool thread is cheaper, flexible and will stay put. The silk one gives a nice shine, is very strong and easy to lace with. Decide based on your project. To finish the cord (this one is done with a lucet but they could also be braided or tablet woven) I like to use a point. That will make it easier to lace the dress, but if you don’t have one a thick needle will do the trick too! Just thread the cord on a needle, and use that to lace yourself in. Another option is to make a cord long enough to just loosen up, without having to lace up the whole garment.
