I wanted to tell you about my blue 15th century dress. It is made in a thin twill wool fabric and super comfortable and easy to wear!
This is one of the dresses I wear most when it is hot outside, but made in thicker wool it will give you a really cosy overdress for colder weather too. I have used lots of 15th century pictures as a start for the pattern drafting and overall look, and you can find some sources + more info at the end of the post. Also, there is lots of posts about 15th century garments and fashion here so click the tags for getting to know more. I made this one as a pattern experiment, and it turned out so nice that I am tempted to make another one…
The pattern is basically the same as the one I used for my coat. The skirts are longer and closed in the front with the opening reaching to the waist (easy to get in and out of) and the sleeves are S-sleeves (the seams are in the back) with an option to save on the fabric by inserting a gore in the back of the sleeve. This is the pattern outlay from the coat; if you want to make it to a dress just give the skirts more length, and redraft the sleeves to S-sleeves if you want.
The measures you need:
- Lenght of garment (from shoulder to floor for example)
- Armhole (or use a toile or pattern that fits you, the armholes are made in “the regular way” but will be a little deeper due to the width of the garment starting already from the shoulder. If you use a toile as a start, place the neck-hole around 20 cm (size s-m) from the selvedge and draft neck-hole, shoulder and armhole from the toile before continuing the sides in a straight line.)
- Sleeve length and wrist circumference (for the sleeves)
- Shoulder width (around 8-13 cm) from the neck hole to where the sleeve starts.
- Upper body circumference. Measure your body, and split the measure in 4. Use this as a guide for drafting the start of the pattern; the neck-hole, shoulder and armhole.
As a reference, I started the neck-hole 20 cm from the selvedge/fabric edge and then drafted the pattern from there. To make sure you get the measures right and will fit in the dress; measure the width of the fabric pieces before cutting, especially if you have broad shoulders. Compare with the width needed over your shoulders.
It is easier to start from a corner, with the front piece and front sleeve gore 1.
If you are a beginner in drafting patterns, it really helps to start on a piece of paper with your measurements. Experiment until you feel more secure, and if you like, you can even cut the paper pieces out and tape them together to check the fitting. You don’t have to make the pattern a full scale, you can work on a checkered paper with a scale of 1:10 (1 cm being 10 cm in reality)
The gores for the front and back skirts are just there to give some additional width to the skirt (F1, F2, B1, B2) and they should be half the lenght of the back/front seam. So they will get longer if you draft the skirt longer.
Give the pattern a try! This is one of those outlays that may seem more complicated than it really is.
After you have cut out all the pieces, sew them together:
- back seam and gores
- shoulder seams
- side seams
- sleeves
- insert the sleeves in the dress
- front seam and gores (leave the dress open from the waist or the chest area up)
- hemming and 1-3 small clasps at the front (if you like)
When I made the dress I tried different ways to achieve the folds; basting, gathering, and with a strip of fabric on the inside… But I like it best when it is loose and flowing so I removed all the stitching. Every time I put it on now I arrange the folds after putting on the belt. They may slip around a little but is easy to adjust again to your liking.
Most of the fabric is gathered at the front and back to drape the skirt nicely, without adding bulk on the sides. When choosing fabric, a thin but tight weave will give you a good fall and heavy drape to your dress.
There are lots of pictures of this style of dress, with draped folds, and what appear to be sewn ones. The sleeves can be made rather tight or looser, and the neckline higher or lower. Check out my pinterest for more inspiration!
