You know when you are browsing fabrics, looking for something practical and discreet to make a working garment with? Yeah, that didn’t go as planned here…
I fell in love with this silk brocade and bought several meters of it during Double Wars. I had no plan at the moment, but it was lovely and the pattern a replica from the 15th century, so I figured I would find it useful. However, it took a couple of years to come around to cutting the fabric and making it into this gown.
I collected some examples of dresses that I liked that would fit the time period, social status and use for this fabric. This one is a favourite, painted by Pedro Berruguete around 1485, but I already made a tight fitted one when I made my velvet overgrown for the wedding, so I opted for a looser style now.
The weave, material and pattern of the fabric place this project at the top of the social structure in 15th century Europe, something to be worn by royalty. Brocades are most often seen as outer garments, with wide panels and a loose fit (the better to be taken apart and remade for the next wearer?) Here’s my pinterest board with examples. This fits my fabric well, since it is quite stiff, with a dramatic drape.
The model is best described as an overdress or houppelande, with narrow S-sleeves. The panels starts to get wider below the armhole, and adds as much volume as possible to the hem. The neckline is cut in a V-shape and slightly rounded in the back. I made the back panels longer to get a train and cut the middle front straight and floor-length to be able to walk in it without tripping over the hem.
Working with brocade fabric:
When making silk brocade garments for yourself, remember that you need more seam allowance than you use when sewing in wool or linen. First, the fabric will often shred and loose threads everywhere, and second, the brocade is often stiff and does not give any flexibility when worn. I calculated 1 cm extra seam allowance (2,5 cm instead of 1,5 cm) and another 2-4 % of the total measure for movement (if your pattern is 100 cm around the bust, the total will be 102-104 cm + seam allowance).
I do not wash silk brocades before sewing, instead, I steam them with an iron. This will lose the weaving tension without altering the fabric appearance overly much.
When drafting the pattern pieces, remember to adjust them to the fabrics pattern and right/wrong side. This means that if you want to use your fabric wisely, half the dress will have the pattern running in the ”wrong” direction. On my dress, the pattern is ”upside down” on the back panels, and the right way in the front. The fronts are not matched pattern-wise but cut out to maximize the use of the fabric. To the modern eye, this might feel wrong, but never mind modern ideals! Also, piecing in the skirt or sleeves does not have to follow the pattern direction, just use what scraps you have.
After cutting your fabric pieces, I recommend zigzagging or overlocking the edges on your sewing machine, even if you are about to hand sew your garment and will have to rip away the threads while you work. This will prevent the seam allowance to disappear before you have even finished sewing the pieces together.
For hand sewing, silk thread and running stitches or backstitching will do fine. Try pinning only in the seam allowances to avoid damage to the fabric, or use small clamps instead of pins. I also like to bast; here is the sleeve sewn into the armhole with a linen basting thread, before backstitching it with silk thread.
If you prefer to sew your garment on a machine, use a silk thread and a little longer stitches than normal, to allow for a good looking seam. You might want to adjust the thread tension a bit- try on some scraps first!
I press all my seams while working (with steam and a cloth), to make them tidy and easier to sew down. If you don’t want to fell the seams, leave a zigzag or overlock on the inside. If you prefer to fell the seams, use silk thread and try to press and fold the seam allowance as tight as possible for a nice finish. The hem is also pressed and folded over twice before I whip stitch it in place.
The gown, before the finishing pressing with steam. Notice that the sleeves pulls a bit toward the back? The seam is a bit on the tight side, I should have used looser stitches when closing the sleeve. Now I had to adjust it with a good steam and press to reset the shape. Never underestimate steam!
I have yet to wear the dress to an event, and I am really looking forward to it. This type of dress needs to be paired with nerdy headwear, sparkly jewellery and a great party!